 |
Good Efficiency with XE 1100
Trane split outdoor air conditioners and heat pumps, when combined with an indoor gas furnace and cooling coil or an air handler, provide a balanced system to offer you maximum comfort at lower operating costs. The XE 1100 air conditioners offer efficiency SEER ratings in the 11.00 range and HSPFs in the 8.00 range, which exceed the minimum standards mandated by federal standards today.
Plus, if your old unit is at least 10 years old, you could realize up to 45 percent accumulated savings over a 3-year period of operating costs. That savings is based on a comparison of an old 6.00 SEER unit with a new 11.00 SEER.
Efficiency ratings and lower operating costs, coupled with advanced technology features shown below, are some of the reasons why Trane is a world-class manufacturer of heating and air conditioning products.
XE 1100 Benefits
Lowers Utility Bills
- 11.00 SEER Efficiency Range
- 8.00 HSPF Range
Lasts a Long Time
- Full-Side Louvered Panels
- Baked-On Powder Paint
- Corrosion-Resistant Screws
Runs Time After Time
- Climatuff® Compressor
- Spine Fin™ Coils
- Torture Tested
Backed by Trane’s Industry Leading Limited Warranty
- Ten-Year Limited Warranty on compressor and outdoor coil if installed on or after October 1, 2001 and manufactured on or after January 1, 2000. Earlier installations have five-year compressor and coil limited warranty
- Five-Year Limited Warranty on internal functional parts
- Five-Year Internal Functional Parts Limited Warranty is effective on units installed after October 1, 2001 and manufactured January 1, 2000 or after. Earlier installations have one-year warranty
- Optional Extended Warranties available. Extended warranties cover labor, refrigerant and other costs not covered by Manufacturers Limited Warranty
- Ask your dealer for full warranty information at time of purchase
Please read the Home Comfort Institute’s article “How To Speak Air Conditioning.”
XE 1100 AIR CONDITIONER
| Model |
Nominal
Tons |
Nominal
Capacity
(BTUH) |
Height
(in.) |
Width
(in.) |
Depth
(in.) |
| TTN018D |
1.5 |
18,000 |
24 |
18 |
18 |
| TTN024D |
2 |
24,000 |
25 |
28 |
25 |
| TTN030D |
2.5 |
30,000 |
33 |
28 |
25 |
| TTN036D |
3 |
36,000 |
29 |
33 |
29 |
| TTN042D |
3.5 |
42,000 |
37 |
33 |
29 |
| TTN048D |
4 |
48,000 |
41 |
33 |
29 |
| TTN060C |
5 |
60,000 |
45 |
39 |
35 |
XE 1100 HEAT PUMP
| Model |
Nominal
Tons |
Nominal
Capacity
(BTUH) |
Height
(in.) |
Width
(in.) |
Depth
(in.) |
| TWN018C |
1.5 |
18,000 |
25 |
28 |
25 |
| TWN024C |
2 |
24,000 |
29 |
33 |
29 |
| TWN030C |
2.5 |
30,000 |
33 |
33 |
29 |
| TWN036C |
3 |
36,000 |
37 |
39 |
35 |
| TWN042C |
3.5 |
42,000 |
37 |
39 |
35 |
| TWN048C |
4 |
48,000 |
37 |
39 |
35 |
| TWN060D |
5 |
60,000 |
37 |
39 |
35 |
As part of our continuous product improvement, Trane reserves the right to change specifications and design without notice. Read important energy cost and efficiency information available from your dealer.
[ Back ]
|
